Control Panel; Button Lock Option - Westinghouse SB908 User Manual

Control panel

POWER button
1
2
PROGRAM selection button
Button LOCK
3
4
START button
START light
5
6
Indicator lights
7
Button LOCK light
8
Program lights

Button Lock option

Close the door.
Press the POWER button.
Press the program Button to select a
program.
Press the START button to start the
cycle execution.
To activate the Button LOCK function,
press the button LOCK for 5 seconds,
the button lock light blinks for 15
seconds, then when it is permanently
on, it indicates the key lock is active.
The button lock key stops anyone
from changing the selected program.
If any button is pressed, an audible
signal indicates that the key lock
funtion is active.
To cancel the selected program and
select a new one, reset the
dishwasher by:
- pressing the button lock key for 5
seconds (the keylock light blinks for
15 seconds)
- press and hold simultaneously
PROGRAM and button LOCK
buttons (Cancel) until all the
programme lights will illuminate
(setting mode), then the program
has been cancelled and the key
lock deactivated and a new
program can be selected.
The button LOCK option is
automatically deactivated at the end
of the selected program by switching
OFF the dishwasher or opening and
closing the door.
control panel 7