Troubleshooting - Westinghouse WSF6608KXA User Manual

TROUBLESHOOTING

Error code Possible cause and solution
F1 Overfill
F2 Not draining
F3 Inlet valve faulty
Inadequate water supply
F5
Faulty heater sensor
F6
Over temperature
F7
F8 Heating error
F9 Diverter valve faulty
FE Power supply problem
Control
• Power off your machine and close the tap.
• Contact the customers services centre.
• Water discharge hose is clogged.
• Water drainage hose kinked, check installation.
• The filters of your machine might be clogged.
• Power off–on your machine and activate the program
cancellation command.
• If the error continues, contact the Customer Care Centre.
• Close the tap.
• Contact the Customer Care Centre.
• Make sure the water tap is fully open and that there is
mains water available.
• Water inlet hose kinked, check installation.
• Close the water tap, disconnect the hose from the tap
and clean the filter at the connection.
• Restart your machine, contact the service if the error
resumes.
• Contact the Customer Care Centre.
• Contact the Customer Care Centre.
• Contact the Customer Care Centre.
• Contact the Customer Care Centre.
• Contact the Customer Care Centre.
21
TROUBLESHOOTING