Table of Contents
Advertisement
Host
NumberOfTries
Timeout
Datasize
DSCP
MaxHopCount
Interface
Traceroute
Show Result
5.8.3.
OAM Loopback
Choose Diagnostic > OAM Loopback, and you will see the following page.
Connectivity verification is supported by the use of the OAM loopback
capability for both VP and VC connections. This page is used to perform the
VCC loopback function to check the connectivity of the VCC.
Field
The address of a destination host to
be diagnosed.
Repeat times.
Timeout duration.
Data packet size.
A differentiated services code point
in the TOS identification byte for
service categories in the IP header of
every data packet. A DSCP prioritizes
by coding values using the used 6-bit
bytes and unused 2-bit bytes.
Maximum number of routes.
Select an interface.
Click to start tracing the route.
Click to display the result.
85
Description
Advertisement
Table of Contents
