Bridge
AC-Name
Service-Name
802.1q
Apply Changes
Return
Undo
Source Mac address
MACCLONE
5.4.2.2. Auto PVC
Selecting Auto PVC in the left pane will bring you to the following page. Here,
you can configure auto PVC detection by adding or deleting items to the auto
PVC search table.
Field
You can select Bridged Ethernet,
Bridged PPPoE or Disable Bridge.
The accessed equipment type.
The service name is displayed here.
You can select Disable or Enable. If
enabled, you need to enter the VLAN
ID. The value ranges from 0 to 4095.
Click to save the settings of this page
temporarily.
Click to return to the Channel
Configuration page.
Click to refresh this page.
The MAC address you want to clone.
Click it to enable the MAC Clone
function with the MAC address that
is configured.
53
Description