Field
IP Precedence
IP ToS
802.1p
delete
delete all
5.6.4.
SNMP
Choose Advanced > SNMP, the page shown in the following figure will appear.
Here, you can configure the SNMP parameters.
Field
Enable SNMP
Trap IP Address
priority and P3 is the lowest.
You can choose from 0 to 7 define the priority in the
ToS of the IP data packet.
The type of IP ToS for classifying the data package
You can choose Normal Service, Minimize Cost,
Maximize Reliability, Maximize Throughput, or
Minimize Delay.
You can choose from 0 to 7.
Select a row in the QoS rule list and click it to delete
the row.
Select all the rows in the QoS rule list and click it to
delete the rows.
Select Enable to enable SNMP function. You need to
enable SNMP in order to configure the parameters of
this page.
Enter the trap IP address. The trap information is sent
to the corresponding host.
77
Description
Description