Edimax AR-7211A V2 User Manual page 37

Field
Obtain DNS server addresses
automatically
Use the following DNS server
addresses
Enable NAT
5.2.3. 1483 Bridged
Set the encapsulation mode to LLC/SNAP and click Next to continue:
address, subnet mask and default gateway for the
WAN connection, which is provided by your ISP.
When selected, DHCP automatically assigns DNS
server address.
When selected, you need to manually enter the
primary DNS server address and secondary DNS
server address.
Check this box to enable network address
translation (NAT). If you do not select it and wish
to access the Internet normally, you must add a
route on the uplink equipment. Usually, it is
required to enable NAT.
37
Description