Edimax AR-7211A V2 User Manual page 50

Field
Enable IGMP
PPP Settings
User Name
Password
Type
Idle Time (min)
WAN IP Settings
Type
Local IP Address
Address Port
function. If you do not select it and you
want to access the Internet normally,
you must add a route on the uplink
equipment. Usually, it is enabled.
Enable or disable Internet Group
Management
function.
Enter the correct user name for PPP
dial-up, which is provided by your ISP.
Enter the correct password for PPP
dial-up, which is provided by your ISP.
You can choose Continuous, Connect
on Demand or Manual.
If set the type to Connect on Demand,
you need to enter the idle timeout
time. If the router does not detect the
flow of the user continuously, within
the preset Idle time, the router
automatically disconnects the PPPoE
connection.
You can choose Fixed IP or DHCP.

If you select Fixed IP, enter the local
IP address, remote IP address and
subnet mask.

If you select DHCP, the router is a
DHCP client and the WAN IP address is
assigned by the remote DHCP server.
Enter the IP address of WAN interface
provided by your ISP.
50
Description
Translation
Protocol
(NAPT)
(IGMP)