Wan - Edimax AR-7211A V2 User Manual

5.4.1.3. DHCP Static IP
If you select DHCP Static IP in the left pane, you will see the following page.
Here you can assign the IP addresses on the LAN to the specific individual PCs
based on their MAC address.
Field
IP Address
Mac Address
Add
Delete Selected
Reset
DHCP Static IP Table
5.4.2.

WAN

Choose Network > WAN. The WAN page that is displayed contains WAN, Auto
PVC, ATM Settings and ADSL Settings.
5.4.2.1. WAN
Click WAN in the left pane, the page shown in the following figure appears.
Here you can configure the WAN interface of your router.
Enter the specified IP address in the IP pool range,
which is assigned to the host.
Enter the MAC address of a host on the LAN.
After entering the IP address and MAC address, click
"Add" to add a row to the DHCP Static IP Table.
Select a row in the DHCP Static IP Table, then click
"Delete Selected" to delete this row.
Resets the fields in this page.
Shows the assigned IP address based on the MAC
address.
48
Description