Others - Edimax AR-7211A V2 User Manual

Community name (read-
only)
Community name (read-
write)
5.6.5.

Others

Select Advanced > Others. The submenu contains Bridge Setting, Client Limit
and Others.
5.6.5.1. Bridge Setting
Click Bridge Setting in the left pane and you will arrive at the following page.
This page is used to configure the bridge parameters. You can change the
settings or view some information on the bridge and its attached ports.
Field
Aging Time
802.1d Spanning
Tree
Show MACs
Click Show MACs and the following page will appear. This table shows a list of
learned MAC addresses for this bridge.
The network administrators must use this password to
read the information of this router.
The network administrators must use this password to
configure the information of the router.
If the host is idle for 300 seconds (default value), its entry
is deleted from the bridge table.
You can select Disabled or Enabled.
Select Enabled to provide path redundancy while
preventing undesirable loops in your network.
Click to show a list of the learned MAC addresses for the
bridge.
Description
78