Field
Direction Select
LAN ACL Switch
IP Address
Services Allowed
Add
Reset
If you select WAN for Direction Select, then you will see the following page:
Select the router interface. You can select LAN or WAN.
In this example, LAN is selected.
Choose to enable or disable ACL function.
Enter the IP address of the specified interface. Only the IP
address that is in the same network segment with the IP
address of the specified interface can access the router.
You can choose the following services from LAN: web,
telnet, ssh, ftp, tftp, snmp or ping. You can also choose
all of the services.
After setting the parameters, click "Add" to add an entry
to the Current ACL Table.
Click to refresh this page.
65
Description