Edimax AR-7211A V2 User Manual page 68

Field
Show Routes
Static Route Table
Clicking Show Routes will display the following page - the table shows a list of
destination routes commonly accessed by your network.
5.6.1.2. RIP
Click RIP in the left pane and the page shown in the following figure will
appear. If you are using this device as an RIP-enabled router to communicate
with others using Routing Information Protocol (RIP) - enable RIP. This page is
used to select the interfaces on your devices which use RIP, and the version of
the protocol used.
delete the row.
Clicking "Show Routes" will display the IP Route Table.
You can view a list of destination routes commonly
accessed by your network.
A list of the previously configured static IP routes.
68
Description