Setting The Clock; Using The Electronic Minute Timer - Whirlpool SF387PEY Use And Care Manual

Setting the clock
1. Push the Clock/Set pad. The colon
flashes and TIME will light up on the
display.
CLOCK
2. Use the Hour and Minute pads to set the
time of day. Push the "up" (A) or "down"
(V) pad(s) until the correct time shows on
the display.
I_lI]l d;4
3. Push the Start/Enter pad.
NOTE: If you do not want the clock time
displayed, push and hold the Clock/Set pad
for 4 seconds. To display the clock time
again, push the Clock/Set pad once, then
reset the clock time if necessary.
Using the electronic Minute Timer
The Minute Timer does not start or stop the
oven. It works like a kitchen timer. It can be
set in hours and minutes up to 11 hours,
59 minutes. The Minute Timer will display
minutes and seconds for settings under one
hour. You will hear four 2-second tones
when the set time is up.
1. Push the Timer Set pad. TIMER will
come on and the display will show "0:00"
with the colon flashing.
TIMER
2. Use the Hour and Minute pads to set the
desired time. Push the "up" (1) or "down"
(V) pad(s) until the correct time shows on
the display.
I_fl I_illlllid =
12