Whirlpool SF387PEY Use And Care Manual page 33

To delay the start using Delay Start Time:
Push the Clean pad. Push the Delay Start
Time pad. START, TIME, CLEAN, and "cln"
will light up.
Use the Hour and Minute pads to set the
desired start time. Push the "up" (A) or
"down" (V) pad(s) until the correct time
shows on the display.
[',','_l]]d I_li_i ]Ha d=1
Push the Start/Enter pad. DELAY, CLEAN,
and the time of day will light up on the
display to indicate that the oven is pro-
grammed to start the Self-Cleaning cycle at
a later time.
After the start time has been set, the
Large display will go back to showing the
current time of day. DELAY and CLEAN will
stay on. When the start time is reached,
DELAY will go off, TIMED, HEAT, CLEAN,
and CLEAN TIME will light up and the oven
will start to clean.
4. After the Self-Cleaning cycle is started,
LOCKED lights up on the display when the
oven temperature goes above normal
baking/roasting temperatures. The Lock
Lever must not be moved and the door
cannot be opened when LOCKED is on.
5. After the Self-Cleaning cycle is com-
pleted, the time of day will show on the
display.
continued on next page
33