Whirlpool SF387PEY Use And Care Manual page 22

3. Push
the Cook Time pad. "0:00" with the
colon flashing and COOK TIME will show
on the display.
4. Use the Hour and Minute pads to set the
desired cooking time. Push the "up" (A)
or "down" (V) pad(s) until the correct time
shows on the display.
This example shows a desired baking/
roasting time of 30 minutes.
5. Push the Delay Start Time pad. The time
of day with the colon flashing will show on
the display and START TIME will light up.
6. Use the Hour and Minute pads to set the
desired start time. Push the "up" (A) or
"down" (V) pad(s) until the correct time
shows on the display.
This example shows a desired start time
of 2 o'clock. The oven will automatically
shut off at 2:30 (the set start time plus the
set cook time).
7. Push the Start/Enter pad. DELAY and
BAKE will light up on the display to
indicate that the oven is programmed to
start at a later time.
NOTE: The display will show "door" and a
tone will sound once a minute for 5 min-
utes if the door is latched when you try to
bake/roast.
You can change the temperature or
time settings any time after pushing the
Start/Enter pad by repeating any of Steps
2 through 6.
22