Brocade Communications Systems Brocade 300 Administrator's Manual page 23

4. Select an option for assigning the IP address and click Next. The options vary depending on the
EZSwitchSetup Administrator's Guide
53-1002744-01
FIGURE 8
Second Discover Switch window
configuration of your switch:
•
Keep the current switch IP configuration
This option is available only if EZSwitchSetup detected a valid IP address. Skip to
"Confirming IP addresses"
•
Manually assign a new static IP address
If you select this option and click Next, the Set Switch IP Address window is displayed
(Figure 9). Continue with
•
Automatically obtain a valid IPv4 address
Select this option only if a DHCP server is available on your network. When you click Next,
an IP address is automatically obtained from the DHCP server and the Confirm IP Address
window is displayed. Skip to
Installing and running the EZSwitchSetup wizard
on page 14.
step 5 to enter the IP address.
"Confirming IP addresses" on page 14.
2
13