Brocade Communications Systems Brocade 300 Administrator's Manual page 20

2
Installing and running the EZSwitchSetup wizard
FIGURE 5
Connect Cables window (Ethernet version, without serial cable)
Figure 6 on page 11 shows the cables connecting to the Brocade Fibre Channel switch, setup
computer, Ethernet hub or switch, and network.
NOTE
Not all switches have their serial and Ethernet connectors in the same place as in Figure 6.
Refer to the hardware documentation to determine the correct placement of the serial and
Ethernet connections.
10 EZSwitchSetup Administrator's Guide
53-1002744-01