Changing The Light Bulb - Brother XL-6562 Instruction Manual

A
B
C
,A, CAUTION
• Turn off the main power switch and unplug the machine
before changing the light bulb. If the main power switch
is on when the light bulb is changed, an electric shock
may result. If the machine is on and foot controller is
stepped on, injuries may result.
• To avoid burns, give the light bulb time to cool before
changing it.
1. Remove the power supply plug from the outlet.
2. Loosen the screw on the reverse side of sewing head as shown
in fig, A.
3. Remove the light cover from the machine as illustrated in fig, A.
4. Replace the sewing light bulb. (See fig, B)
_) Bulb
0 Loosen
0 Tighten
Reattach the light cover and fasten the screw as shown in fig,
C.
75