Assembly - ProForm Cardio Crosstrainer 820 User Manual

AssemMy requires two persons. PHace aHH parts of the eHHpticaH crosstrainer in a cHeared area and remove the
packing materiaHs, Do not dispose of the packing materiaHs until assembHy is compHeted, In addition to the
included allen wrenches, assembly requires a phillips screwdriver _ _, an adjustable
wrench __ and a rubber mattet .... ' '
%c--
As you assembHe the eHHpticaH crosstrainer, use the drawings bellow to identify the smaHH parts used in assembHy,
The number in parenthesis bellow each drawing refers to the key number of the part, from the PART LHSTon
page 22. The second number refers to the quantity needed for assembHy. Note: Some small parts may have
been pre-assemMed, if a part is not in the parts bag, check to see if it has been pre-assemMed, if a part
is missing, call toil-free 1-888-533-1333.
\
/
/
MIO SpHit Wave Washer M8,5
Washer (70)-3 (95)-2 Washer (53)-2
"•,\ /_ j'
MIO
Washer(38)-6
iJ
M4 x 16mm
Screw (66)-4
M4 x 22mm
Screw (93)-2
MIO NyHon
Locknut (29)-6
x
M8 x 45mm Button BoHt(50)-4 M8 x 25mm Patch
Screw (22)-2
MIO x 35mm Carriage
i J
MIO x 78mm Button BoHt(27)-2 i i