Go-To Search; Blank Search - RCA VR652HF User Manual

Playing a Tape
Using the Playback Features

Go-To Search

The go-to search feature allows you to locate a counter reading on the tape.

Blank Search

The VCR searches for blank portions of the tape that are more than six
seconds in length.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote twice to display the GO-TO
SEARCH menu on the TV screen.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REW or FF to go to
0:00:00
Press SEARCH to exit
3. Press number buttons to enter the hour(s) and minute(s) of
the time counter reading you want the VCR to search.
Press CLEAR to correct an entry.
4. Press FF on the remote or FWD on the VCR to search
forward or REW to search in reverse.
The time counter is displayed in the upper right corner of
the TV screen during search.
5. Press STOP to stop go-to searching.
1. Insert the tape and press STOP.
2. Press SEARCH on the remote three times
to display the BLANK SEARCH menu on
the TV screen.
BLANK SEARCH
Press FF to begin
Searching for blank
section of tape.
Press SEARCH to exit
3. Press FF to begin searching for six seconds
of blank tape. A message appears on the
screen if a blank area is not found.
4. Press STOP to stop blank searching.
27