Blank Search; Pro-Tect Plus; Locking Feature; Tracking - RCA VR692HF User Manual

BLAN K SEARCH
The VCR searches for blank portions of the tape that are more
than six seconds in length.
1. Insert a recorded tape and press STOP.
2. Press SEARCH on the remote until the BLANK SEARCH
menu appears.
3. Press FWD to begin searching. A message appears on the
screen if a blank area is not found.
4. Press STOP to stop blank searching.
PRO-TECT PLUS
TM
LOCKING FEATURE
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the VCR
or remote won't work.
To Lock: Pressand hold either the remote's POWER or OFF
button. SAFE appears in the display when the feature is
activated. SAFE will flash if you attempt to turn on the VCR
while the feature is on.
• To unlock the feature and turn on the VCR: Press and hold
either the remote's POWER or VCR button.
TRACKING
Your VCR has automatic tracking which removes the streaks or
snow from the picture. Automatic tracking isactivated when you
insert a tape or turn on the VCR. Occasionally you may need to
manually adjust tracking, especially if the tape was recorded on a
different VCR. Just use the TRACKING buttons to remove the
streaks or snow. You can also use tracking when you PAUSE a
tape to reduce jittering of the picture.
When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, press both
TRACKING buttons on the front of the VCR at the same time, or
eject the tape and re-insert it.
Tracking has no effect during recording_only playback.
BLANK SEARCH
Press FMD to begin
searching for blank
section of tape.
Press SEARCH to exit
BLANK SEARCH
Searching for
blank tape...
Press SEARCH to exit
I f MOVIE,,ADVANCE is selected,
Blank Search is not available
r
Locking Your VCR:
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
]
54