To Add Or Remove Channels; To Change The Signaitype - RCA VR911HF User Manual

Thomson
Table of Contents

Advertisement

The VCR begins scanning for the available channels--this takes
about two to three minutes. The lowest channel is tuned once
the search is complete. Now pressing CHANNELup or down
should only select the active channels.
To Add or Remove Channels
You may want to add or remove channels after you Auto
Channel Search, especially if some of the channels have weak
signals or you don't want to watch them.
,
2.
3.
Press MENU.PROG to display the VCR MAIN MENU.
Press2 to display the CHANNELS menu.
Press 2 to display the ADD/REMOVE
CHANNELS
screen. Use
CHANNEL
up or down or number
buttons
to go to the
channels you want to remove
or add.
ADD/REROVE
CHANNELS
Channel
115
is
presently
ADDED
Press
CLEAR
to
remove
Press
RENU
to
exit
ADD/REROVE
CHANNELS
Channel
115
is
presently
REROVED
Press
1NFO
to
add
Press
RENU
to
exit
To
1.
2.
3.
Change
the
Signal
Type
Press MENUopROG to display the VCR MAIN MENU.
Press 2 to display the CHANNELS menu.
Press 3 to change the Signal Type between
CABLEand
ANTENNA.
Selecting
Channels
n
The CHANNEL up and down buttons
access those channels active in your VCR
channel list.
You can still access channels not in the
channel list by using the number buttons
on the remote.
:9

Advertisement

Table of Contents
loading

Table of Contents