To Change The Signal Type; To Add Or Remove Channels - RCA VR643HF User Manual

AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels_this
takes about one to two minutes. The lowest channel is tuned
once the search is complete. Now pressing CHANNEL up or
down should only select the active channels.
To Change the Signal Type
1. Press MENU to display the VCR MAIN MENU.
2. Press4 to display the CHANNELS menu.
3. Press3 to change the Signal Type between CABLE and
ANTENNA.
To Add or Remove Channels
You may want to add or remove channels after you Auto
Channel Search, especially if some of the channels have weak
signals or you don't want to watch them.
1. PressMENU to display the VCR MAIN MENU.
2. Press4 to display the CHANNELS menu.
3. Press2 to display the ADD/REMOVE CHANNELS screen. Use
CHANNEL up or down or number buttons to go to the
channels you want to remove or add.
ADD/REROVE CHANNELS
Channel 115
is presently ADDED
Press CLEAR to remove
Press HENU to exit
ADD/REHOVE CHANNELS
Channel 115
is presently RENOVED
Press INFO to add
Press MENU to exit
Selecting Channels
The CHANNEL up and down buttons
access those channels active in your
VCR channel list.
You can still access channels not in
the channel list by using the number
buttons on the remote.
11