Table of Contents
Advertisement
CONNECTIONS
I
. _i
._
__=
Recording
connection
cord
Playback
connexion
cord
Power cord Z.,
• Remote control cord
TAPE REC/PLAY
jacks
ooOl
Stereo
Amplifier
CONTROL OUT jack
•
Read through the operating instructions of the stereo compo-
nents which you intend to connect to this unit.
•
Turn the power on only after making all of the connections.
•
Make sure that all of the connection plugs are inserted se-
curely, as improper connections may 0enerate
noise.
I CONNECTING
THE RECORDING
AND
PLAYBACK
CORDS
Left channel
White
plug
Right channel
Red plug
Connect the TAPE jacks of your amplifier to the LINE jacks of the
cassette deck. Be sure to connect the REC (INPUT) jacks of the
deck to the recording (output) jacks of the amplifier, and the PLAY
(OUTPUT) jacks of the deck to the play (input) jacks of the amPli-
fier.
•
Connect the plugs properly:
Left channel -- White plug
Right channel -- Red plug
POWER-CORD
CAUTION
Handle the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when your
hands are wet as this could cause a short circuit or electric shock.
Do not place the unit, a piece of furniture, etc., on the power cord,
or pinch the cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed in such a way that they
are not likely to be stepped on. A damaged power cord can cause
fire or give you an electrical shock. Check the power cord regu-
law. When you find it damaged, ask your nearest PIONEER auth-
orized service canter or your dealer for a replacement.
t
i
PIONEER
SYSTEM
REMOTE
CONTROL
i
CONTROL
IN jack
Use the enclosed
Remote
Control
Cord to connect
this jack to the
CONTROL
OUT
jack
of
another
component
which
bears
the
_]_ mark (indicating
that it is equipped
with
PIONEER
System
Re-
mote
Control).
You will
then be able to operate
this unit using the
Pioneer
system
remote
control
unit.
If the
remote
control
unit
does not have
separate
buttons
for deck I and deck II, or a selec-
tion button
to choose
deck
I or deck II, the buttons
will only oper-
ate deck II. To operate
deck I with a remote
control
unit which was
not designed
for double
deck cassette
decks,
see page 8.
CONTROL
OUT jack
Intermediary
jack
which
outputs
signals
from
the
CONTROL
IN
jack of this unit to the input jack of another
unit. Connect
this jack
to the CONTROL
IN jack of another
component
compatible
with
Pioneer
System
Remote
Control.
NO TE:
Be sure to connect
both of the control
cord's plugs securely
to the
CONTROL
IN and
CONTROL
OUT jacks.
Do not connect
only one
end of the cable.
CONNECTING
THE POWER CORD
!
J
Insert
the power
cord of the cassette
deck into the accessory
AC
outlet
of your amplifier,
or into a normal
household
outlet.
6
< RRB1150>
Fn
Hide quick links:
Advertisement
Table of Contents
