Loadingand Unloadingtapes - Mitsubishi HS-U410 Owner's Manual

Chapter3: OperatingYourVCR Viewing the PictureComing tromYourVCR(,cont.)
_Important:
Viewingthe picture comingfrom your VCR if you are using a
regular TV
O Turn on your TV and turn it to channel 3 or .l.
O Turn on the VCR by pressing: the POWER button.
Check to see if the %rCR" light on the front g,anel display is
lit. If it is not lit, press the VCR/TV button until it is lit.
You are viewing the picture from your VCR!
With this set-up, you will use the VCR?IW butto:_ when recording,
when viewing tapes or broadcast stations throu_:h your VCR, or
before using the VCR's menus. You also use the VCR/TV butto_
to switch back to normal TV viewing.
Viewingthe picturecomingfrom your VCR if you are using a
monitor TV
I_ Turn on your TV an(] switch it to the correct external input.
(For most Mitsubishi TVs, this means pressing the TV's
INPUT button until you see the words "Ext-l" on the screen.)
Turn the VCR on by pressing the POWER batton.
You are viewing the picture from your VCR!
If you wish to return to normal _[W viewing, swi'och your TV's
input back to its previous position.
If your system includes a home 1;heater receiver or an A/V re-.
ceiver, you need to refer to your home theater receiver's owner's
guide.
Loadingand UnloadingTapes
This section explains loading an d unloading talc.es.
E>Important:
Correct O
Incorrect_ 0
Tapes can be loaded into your VCR as long as the VCR is plugged
in. Even when the VCR POWER is off, loading a tape will auto-
matically turn the VCR on. Use only tapes that have a _label.
Loading a tape
Hold the tape so that the lo_g narrow edge with the contents
label faces towards you. The other edge is; hinged and should
face towards the VCR. The :plastic window that shows tlne
videotape should face up.
Gently insert the tape into !;he cassette slot until the VCR
automatically takes it in.
22