Jumping To Specified Point (Go To) - Panasonic VDR-M53PP Operating Instructions Manual

Jumping to Specified Point (Go To)
OSpecifying the point to view
1
Choose"Specify" in step 2 above, and then press
the l,-/il button.
The screen for specifying the point to go to will
appear.
Positionof currently Totalrecording time of
played back image all selected scenes
Cursor position
2
Use the control buttons to select the desired time
of chosen point.
Press the _ button :To select the start.
Press the _ button : To select the end.
Press the _ or _ button :
-Press once: To move the cursor in 10-
second units (1-still units
for card)
-Hold down: To move the cursor in 1-
minute units (10-still units
for card)
Qmm
Top :To go to the start, and enter playback
pause.
End :To go tothe end of last scene, and enter
playback pause.
Specify :To go to a specified point and enter
playback pause. See the following for
details.
3
Press the ,/li button to enter the selection.
The DVD Video Camera will go to the specified
point and enter playback pause mode.
Pressing _./11 again will start playback.
To cancel the "Go To" procedure midway, press the
• button before going to the specified point.
Note:
• If multiple scenes are selected using the Disc Navigation
function or SELECT button, choosing "Top" will jump to
the beginning of selected scenes (R 123).
• When multiple scenes are selected, the total time of
selected scenes will appear in the total recording time"
display.
• With card, the number of stills will appear at the "TOP".
CURRENT", "END" and GO TO" indicators.
• The cursor may not move at same-pitch intervals.
(When the start of scene is selected)
Cursor at current image position.
m Cursor at (GO TO) position.
52