Panasonic VDR-M53PP Operating Instructions Manual page 160

When the DVD Video Camera is connected to PC:
No drive icon appears on The DVD Video Camera is not turned on.
PC. Check the power supply. 50
Turn PC off and then disconnect the USB cable. Turn PC on again,
and then use the USB cable to connect the DVD Video Camera to
PC.
Make sure the USB cable is completely plugged into this DVD Video
Camera.
Error occurs in playback If error occurswith USB connection,thetransfer rateis not sufficient.
of DVDVideoCameraon It is recommended that you use a USB terminal conforming to 147
PC. USB2.0 when connecting the DVD Video Camera.
Application is Turn the PC and DVD Video Camera off, and try again.
abnormally run on PC.
Error occurs during Thetemperature of DVD Video Camera is too high due to continuous
writing to disc. operation.
Disconnect the DVD Video Camera from PC once, remove the disc
from the DVD Video Camera, and then turn it off. After a few
moments, connect them again and write to a brand-new disc.
Transfer of images stops. Connect the DVD Video Camera to another USB terminal of PC. If
/our PC is a desktop type, it is recommended that you use USB
terminal on the back of PC.
DVD-RAM/R drive built This problem may be solved if the software related to DVD-RAM/R
into PC cannot be used of your PC is upgraded, or if the DVD-RAM Driver is uninstalled.
However, with Windows Me / 2000 Professional, uninstalling the after the provided ®
software has been DVD-RAM Driver will make it impossible for the JPEG stills recorded
installed, on DVD-RAM on this DVD Video Camera to be read by the PC.
DVD-R disc cannot be DVD-MovieAIbumSE does not support playback or data read of
played back on DVD- DVD-R disc. Use optional-user provided DVD video playback 139
MovieAIbumSE. software to play back DVD-R disc on PC.
Error appears when Make sure that your PC display adapter (video card) conforms to
starting DVD- DirectX 8.1.
MovieAIbumSE.
Movies are not Make sure the power switch of this DVD Video Camera is set to
recognized by " J_l_ ", " I_1 "or " I_1 ".
application in PC.
The DISC EJECT lever While the DVD Video Camera is connected to PC, use Explorer to
does not work when the right-click the DVD Video Camera drive icon and execute "Eject".
DVD Video Camera is
connected to PC.
The DVD-RAM drive of If DVD-MovieAIbumSE is running, terminate it.
DVD Video Camera
cannot be opened by PC
Explorer or application.
Error appears. Disc
cannot be ejected.
When the time stamp of The file system of this DVD Video Camera is operated on Greenwich
file in DVD-RAM is Mean Ti{Tle (GMT), and time lag information has not been set. With
viewed on PC, it is -®
Windows , the time stamp of file viewed on Explorer looks different
different from the actual from the actual recording time. The actual recording time will appear
recording time. as date/time indication on playback screen.
When DVD- A disc other than DVD-RAM is loaded in drive: DVD-MovieAIbumSE
MovieAIbumSE is cannot be used for media other than DVD-RAM.
started, "Disc in Drive X:
cannot be used" Click the "Preference" button in the dialog box, click the "Device
appears, setting"tab to choose the d rive where DVD-RAM disc is loaded in the 143
"Drive Select" column, and then click "OK".
160