Jumping To Specified Point (Go To) - Panasonic VDR-M70GC Instruction Manual

Jumping to specified Point (Go To)

1
Press the MENU button
during playback.
2
Choose the option (point
you want to go to), and
then press the A button.
●Specifying the point to view
1
Choose "Specify" in step 2 above, and then
press the A button.
The screen for specifying the point to go to will
appear.
Position of currently
played back image
Go t o
TOP
0 : 00 : 00
Cursor
GO TO
TOP
Cursor position
2
Use the joystick to select the desired time of
chosen point.
Tilt up
Tilt down
Tilt to left or right
–
Press once: To move the cursor in 10-
–
Hold down: To move the cursor in 1-
Go t o
TOP
0 : 00 : 00
GO TO
TOP
(When the start of scene is selected)
Cursor at current image position.
Cursor at (GO TO) position.
VQT0K98
60
228
Go T o
To p
En d
S p e c i f y
ENTER RETURN
Total recording time of
all selected scenes
CURRENT END
0 : 03: 26 0 : 24 : 24
0 : 03: 26
END CANCEL
ENTER
: To select the start.
: To select the end.
:
second units (1-still units for
card)
minute units (10-still units
for card)
CURRENT END
0 : 03: 26 0 : 24 : 24
0 : 0 0 : 00
END CANCEL
ENTER
Top : To go to the start, and enter playback
pause.
End : To go to the end of last scene, and
enter playback pause.
Specify : To go to a specified point and enter
RAM
playback pause. See the following for
details.
3
Press the A button to enter the selection.
The DVD Video Camera will go to the specified
point and enter the playback pause status.
To cancel the "Go To" procedure midway, press the
C button before going to the specified point.
:
Note
•
If multiple scenes are selected using the Disc Navigation
function or SELECT button, choosing "Top" will jump to
the beginning of selected scenes (P. 119).
•
When multiple scenes are selected, the total time of
selected scenes will appear in the "total recording time"
display.
•
When card is loaded, the number of stills will appear.
•
The cursor may not move at same-pitch intervals.
123