Turning Dvd Video Camera On Or Off - Panasonic VDR-M53PP Operating Instructions Manual

Dvd video camera
Hide thumbs Also See for VDR-M53PP:
Table of Contents

Advertisement

This section
explains
the basic techniques
of recording
movies
and still images,
and also basic settings
on DVD Video Camera.
Basic Operation
of DVD Video Camera
Turning DVD Video Camera On or Off
Set the switch
to the appropriate
recording
function
while
holding
down
the button
to the right of the
power
switch.
--Align
with
"_":
this position
To record
still on SD
While
Memory
Card or miniSD
Rotatehl _
_>._
pressing
Memory
Card
,o
_4
_;-"\'_
'
FF":
The DVO Video
Camera
willturno,,.
)mll •
To record movie
on DVD-
RAM
or DVD-R
disc
To record
still on DVD-
RAM
disc.
Power ON status
During playback, set the power switch to" _"
or
" I_1" when using disc, or set it to "_1" when using
card.
Turn the switch while holding down the button at the
right of switch.
Note:
• Once you turn the DVD Video Camera on to let it
recognize the disc, you can immediately
record or play
back the same disc when the DVD Video Camera is
turned on again. However, if the disc is left in the camera
for an extended period, it will take some time for the
camera to recognize the disc again (See page 149).
• Itwilltakesometime
for the DVDVideoCameratodisplay
the Disc navigation screen after power is turned on.
• When you turn the DVD Video Camera on, the ACCESS
indicator will light or blink to show that the DVD Video
Camera is recognizing
the disc or card: During this time,
no operation,
such as recording, can be performed.
After several seconds, the ACCESS indicator will go out.
and operating the DVD Video Camera will be possible.
If the ACCESS indicator does not go out, refer to "Check
4" on page 149.
CCESS/PC
_ICARD
ACCESS"'_i
_
n"_t_-_" -S_t_
i dicat°r
indicator
• When the DVD Video Camera is turned on, the self-
diagnosis function operates and a message may appear.
In this case, refer to "Error Messages" on page 151 and
take corrective action.
• While the ACCESS/PC
or CARD ACCESS
indicator is lit
or blinking, do not cause impact or vibration to the DVD
Video Camera.
5O

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vdr-m75ppVdr-m95ppVdr-m55pp

Table of Contents