Panasonic VDR-M53PP Operating Instructions Manual page 161

An image that should Click the "Preference" button at top right of DVD-MovieAIbumSE
have been recorded screen, click the "Device Setting" tab to choose the drive where
does not appear when DVD-RAM disc is loaded in the "Drive Select" column, and then click
DVD-MovieAIbumSE is "OK".
started.
The DISC EJECT lever
does not work.
143
• Insert DVD-RAM discs in the camera before connecting the DVD
Video Camera to your computer. The cover of the disc insertion
block may not open after the camera is connected to a computer
in some cases.
• After files are exported from DVD-MovieAIbum, a confirmation
message is displayed about ejecting DVD-RAM discs. Select
"Eject the disc being used."
Make sure that you have already installed the driver provided with
the USB2.0 card.
You will need to install the driver provided by USB2.0 card maker in
order to operate the USB2.0 card at HS (high speed).
• If stills are included in the range of"export", it may take more time
because data must be re-encoded and read.
• If "Divide by Chapter" is not chosen, it may take some time
because data will be read while being re-encoded.
No USB HS (high speed)
connection even when
USB2.0 card is used.
When executing "Export"
on DVD-MovieAIbumSE,
it takes much time to 143
read.
161