Panasonic VDR-M53PP Operating Instructions Manual page 104

Q
Changing Images for Thumbnails (Effect - Thumbnail)
Normally,the first image of the recorded sceneis displayed as athumbnail: Youcan choose another image
of the scenefor thumbnail. Ifyou set a vivid image as the thumbnail, you can know what you recordedfrom
a glance at the Disc Navigation screen.
Original !humbnail Youcan use this image as thumbnail.
/
I
• • •
1
Press the DISC NAVIGATION button.
2
Select the thumbnail of the scene to be changed.
3 Press the MENU button.
4 Choose"Scene", "Effect",
"Thumbnail", and then
press the I_/11 button.
5 The "Change Thumbnail"
screen will appear. If you I
are sure you want to
change the thumbnail of
the selected scene, press
the I_/11 button: the
selected scene will be
played back.
If you want to change the scene whose
thumbnail is to be changed, you can change it on
this screen.
7
The screen for verifying
switching of thumbnail will
appear: choose "YES",
and then press the I_/11
button.
Choose "NO" to cancel
switching of thumbnail.
After Yes or No setting, the "Change Thumbnail"
screen will be restored.
Repeat steps 5-7 to change other scenes.
8 Press the • button to quit.
Note:
• If you press the MENU button before pressing the It-/ll
button in step 5, the submenu screen will appear. (See
page 103)
• A thumbnail of still cannot be changed.
• Since the scene to which skipping is set cannot be played
back, you will not be able to change its thumbnail,
Release the skip setting of the scene to change the
thumbnail.
O When the image you want to use as the
thumbnail of the scene appears, press the
SELECT button.
104