Connecting To Wi-Fi; Connecting To A Wireless Access Point - Panasonic HC-V727 Operating Instructions Manual

Wi-Fi [HC-V720]/[HC-V727]/[HC-V720M]

Connecting to Wi-Fi

To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
If the clock has been set for the first time, the confirmation message for the Wi-Fi settings will be
displayed. Touch [YES], and then configure the access point settings below.
∫ About the status indicator and the connection status icon when
connected to Wi-Fi


Connecting to a wireless access point

Check if the wireless access point you are using is compatible with WPS.
j If the wireless access point is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If the wireless access point is not compatible with WPS:
[Manual Connection]
≥ WPS is an abbreviation for Wi-Fi Protected Setup™.
[Easy Connection (WPS)]
∫ If this is the first time the Wi-Fi button is pressed.
1
Press the Wi-Fi button.
2
Touch [YES].
3
Touch [Easy Connection (WPS)].
A Lit green
≥ The status indicator is lit green while this unit is

connected to a destination device after completing a Wi-
Fi connection.
≥ When Wi-Fi is disconnected, the status indicator is lit red
again.
B The connection status icon
When connected to wireless access point:
connected to Wi-Fi/
≥ The display will change as follows according to the radio
wave intensity:
When directly connected:
connected to Wi-Fi/
(l 130)
- 128 -
not connected to Wi-Fi
# # #
not connected to Wi-Fi
.