Setting Flash - Panasonic VDR-M53PP Operating Instructions Manual

Qi
Setting Flash
(See "Introduction to Optional Accessories" on page 145)
When shooting stills, you can use the optional VW-
FLH3 .1 Flash (R 145). Refer to the Flash manual for
instructions.
ii?jl .....
AUTO @ Automatically A .2 emits light in dark
)lace or in a place
lit from rear.
ON l Always emits light
regardless of
brightness.
OFF _p' No light emission.
.1 Only for VDR-M75PPNDR-M95PP
.2 Without light emission, the" ,_A"display is cleared
when you press the Photo shot button halfway.
When using the flash, if you press the Photo shot
button half-way the indication will change to "_".
Note:
• The DVD Video Camera automatically sets the shutter
speed between 1/800 and 1/30 second (between 1/800
and 1/10 second if Program AE has been set to Low
Light) depending on subject brightness (R 80),
• The available range of the Flash is about
1 -4m.
• See Switching Quality of Still Image (Quality)" on
page 85 if you want to change the still quality mode.
• Dark subjects may not be in clear focus even if the Flash
is used, It is recommended that you illuminate a subject
when recording in a dark place.
• When you use accessories for hot shoe (only optional
VW-FLH3), the power is supplied by this DVD Video
Camera, (Only for VDR-M78PP/VDR-M98PP.)
• The built-in flash cannot be used together with the
separately sold Flash,
• If a separately sold Flash is connected, it is given priority.
(Only VDR-M98PP.)
69