Bme Internal Access - Extron electronics Matrix 3200 Series User Manual

Chapter 5 • Upgrades and Troubleshooting
Matrix 3200/6400 Video BME Internal Access
______ Before opening the BME, turn power OFF and unplug the AC power cord. High
Extron • Matrix 3200/6400 Series • User's Manual
voltages are present inside the BME and the FPC 1000 Front Panel Controller.
Upgrades or repairs may require access to internal areas of the Matrix 3200/6400
Video BME. This involves removing the access panel (blank or FPC 1000) using
a coin or a flat blade screwdriver to rotate the two captive screws (Figure 5-2.A)
as shown in Figure 5-2.B. Pull the top of the access panel out slightly then lift up
and remove it from the front panel. The FPC 1000 will have a cable connecting it
to the Main Controller, unplug the connector.
When done, reverse the procedure to reinstall the access panel
RGB
MUTE
AUDIO
MUTE
Figure 5-2.A Use a coin or screwdriver to rotate two captive screws.
R G
M U B
T E
A U
D IO
M U
T E
See note
above.
Figure 5-2.B Removing the access panel (blank or FPC 1000)
Captive screws
SYSTEM
POWER SUPPLIES COMMUNICATIONS
STATUS
+V -V RS232 BME REMOTE
PRIMARY TX
REDUNDANT RX
DIAGNOSTICS
FPC-1000
MATRIX 6400
VIDEO
5-2