Wall Mounting A Dss Console; Wall Mounting A Dss Console On A Standard Wall Plate - NEC 1090030 - DSX Systems PHONE SuperDisp Phone BLAC Hardware Manual

Wall Mounting

Wall Mounting a DSS Console

Wall Mounting a DSS Console on a Standard Wall Plate

To mount the DSS Console on the standard wall plate:
1. Locate and wire a standard wall plate in a convenient location.
Fold the DSS Console legs into the wall mount position.
2.
Fold the two leg supports down flush with the legs.
3.
Plug a short line cord into the DSS Console base.
4.
• If required, coil the excess line cord into the cavity as shown.
5. Plug the other end of the short line cord into the wall plate.
6. Place the DSS Console on top of the wall plate and slide into place.
4
60 ◆ Optional Equipment
3
Figure 39: Mounting the DSS Console to a Standard Wall Plate
3
2
1
6
5
6
DSX-40 Hardware Manual