Installing IntraMail
To set up IntraMail:
Plug the IntraMail CompactFlash card into the Main Equipment Cabinet.
1.
Reset the system. The IntraMail automatically installs.
2.
- If updating from the Built-In Automated Attendant, just rerecord your Instruction Menu Messages.
- By default, the first 16 (300-315) mailboxes are active/enabled and the IntraMail Automated Atten-
- See Start-up IntraMail Programming in the front of the IntraMail section of the System Guide for more.
48 ◆ Optional Equipment
Your Answer Schedule and Dial Action Table programing remain intact.
dant does not answer outside calls.
Figure 29: Installing IntraMail
1
2
DSX-40 Hardware Manual