To Hold A Call; To Transfer A Call - NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Quick Start User Manual

TO HOLD A CALL

Press key. Held line wink flashes.
HOLD
HOLD
1:25 PM
MIC
Note: If held line appears on other DT Series stations,
the associated LED flashes red slowly.
To Retrieve
Lift handset or press
Press held line. Use handset to converse.
Note:
Any station with this line appearance can retrieve
the call.
If unanswered
After preprogrammed time, Automatic Recall is ini-
tiated.
Visual and audible signal (rapid flash and ring
burst) is sent to station that placed call on hold.
Hold shows as a flashing green LED on your phone.
The same line on other phones shows as a flashing
red LED. Recall shows as a flashing green LED on
your phone and flashing red LED on other phones with
the same line.
DT730/710 DT330/310
Held Station Number
2001
TUE 18 MAR 2008
>>>
Speaker
key.

TO TRANSFER A CALL

DT730/710 DT330/310
After conversing, ask party to hold.
Press key. Receive interrupted dial tone.
Transfer
TRANSFER
1:25 PM
MIC
Dial destination station's extension, hang up or wait
for answer.
TRANSFER
1:25 PM
MIC
If transferring party hangs up, that station's number
appears in the center of recipient's display.
Transferring station
TRANSFER 2000
1:25 PM
MIC
26
TUE 18 MAR 2008
>>>
Transferred station
or trunk number
2001
TUE 18 MAR 2008
>>>
DDD 3
TUE 18 MAR 2008
>>>