Last Number Redial; Call Forwarding - All Calls - NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Quick Start User Manual

LAST NUMBER REDIAL

DT730/710 DT330/310
To Recall Last Number Dialed
Press key. Last number dialed is displayed.
Redial
LNR[# or
MIC PICK
Press key until desired number is dis-
Redial
played. Up to 5 previously dialed numbers.
Press # or . The number on the display is auto-
matically redialed.
When party has answered, lift handset or speak
hands-free.
Note: A-law Countries [Australia, Russia, Latin Amer-
ica, UK, Middle near East, other Asian nations]:
#
µ-law Countries [North America, Japan, Hong
Kong, Taiwan]:

CALL FORWARDING - ALL CALLS

DT730/710 DT330/310
To Set
Speaker
Press key. Receive dial tone.
If setting for another station, press MULTILINE
APPEARANCE.
Press FWD or dial "Call Forwarding – All Calls"
]/SPD[_ _] –X
XXXXXX
FDA >>>
access code. Receive special dial tone.
Dial destination station or external telephone num-
ber. Receive service set tone.
FWD LED lights (at your station or at the DT Series
of the multiline station you are setting).
Speaker
Press key. Call Forwarding – All Calls is
set.
FORWARD SET
1:25 PM
Using Soft Key
Press FDA Soft Key. Receive special tone.
Dial destination; wait for service set tone.
"FORWARD SET" is displayed, call forwarding for
all calls is set.
FORWARD SET
1:25 PM
MIC
To Verify (Only For Terminal With LCD)
Press FWD.
Display indicates the station number calls are for-
warded to.
35
Forwarding
station
2000
TUE 18 MAR 2008
TUE 18 MAR 2008
>>>