To Login; To Logout - NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Quick Start User Manual

TO LOGIN

DT730/710
Note:
This feature is only available for DT700 Series.
When login mode is activated, the telephone
prompts for Login ID and Password.
Login ID :
Password :
Cancel Back
Enter login code and press Set soft key.
(Station number is used as the Login code.)
Login ID :
Password :
Cancel Back
Enter the password and press OK Soft key.
Login ID :
Password :
Cancel Back
If the login code is accepted, display changes to
normal idle status.
7:25 AM MON 18 JUL 2008
MIC DND
-
Set OK
2000
Set OK
2000
*****
Set OK
>>>

TO LOGOUT

Press the preassigned Logout Feature Key on the
terminal.
Note: This feature is only available for DT700 Series.
Note:
The soft key location is an example.
Note: Logout button is assigned by data setting at the
ECP (Enterprise Communication Platform).
7:25 AM MON 18 JUL 2008
MIC
"LOGOUT?" is displayed on the LCD of the termi-
nal.
7:25 AM MON 18 JUL 2008
L-OUT
Press the Logout Feature Key on the terminal
again.
18
DT730/710
DND >>>
LOGOUT ?
>>>