Call Forwarding - Don't Answer - NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Quick Start User Manual

Using Soft Key
Press FDB Soft Key. Receive special dial tone.
Dial destination; wait for service set tone.
"FORWARD SET" is displayed; Call Forwarding –
Busy Line is set.
FORWARD SET
1:25 PM
MIC
To Verify (Only For Terminal With LCD)
Press FWD-BY.
Display indicates the station number calls are for-
warded to.
FORWARD
1:25 PM
Note: With Soft Key operation, FDB flashes on the dis-
play.
To Cancel
Press Speaker key. Receive dial tone. If canceling
for another station, press MULTILINE APPEAR-
ANCE.
Press FWD-BY or dial "Call Forwarding – Busy
Line" cancel code. Receive service set tone. LED
goes out at your station (or the DT Series of the
multiline station).
TUE 18 MAR 2008
>>>
Forwarding station
2000
TUE 18 MAR 2008
Speaker
Press key. Call Forwarding – Busy Line is
cancelled.
FORWARD CANCEL
1:25 PM
Using Soft Key
Press FDB Soft Key.
Receive service set tone and "FORWARD CAN-
CEL" is displayed.
FORWARD CANCEL
1:25 PM
MIC

CALL FORWARDING - DON'T ANSWER

DT730/710 DT330/310
To Set
Speaker
Press key. Receive dial tone.
If setting for another station, press
APPEARANCE
Press FWD-NA or dial "Call Forwarding – Don't
Answer" access code. Receive special dial tone.
Dial destination station or external telephone num-
ber. Receive service set tone.
FWD-NA LED lights (at your station or at the DT
Series of the multiline station you are setting).
Speaker
Press key. Call Forwarding – Don't Answer
is set.
37
TUE 18 MAR 2008
TUE 18 MAR 2008
>>>
MULTILINE
.