Edit Netcommand®: Change Or Delete Devices - Mitsubishi Electric WD-73727 Owner's Manual

Edit NetCommand®: Change or Delete Devices
Change Device Screen
Figure 25
SeHecting Change from the Setup menu screen dispHays
the Change screen. To change a device, seHect the
device by name, not type. You can change the name or
input connections to the TV and AiV receiver_ If "Other"
was seHected for the manufacturer then you can aHso
"Learn/' The rest of the screens that follow are the same
as when you Add a device.
Figure 25. Change screen
Finish Screen
Figure 27
To finaHize your seHections and complete the NetCommand
setup, seHect Finish from the Finish screen.
Note: To change any of the inputs or names for the
devices, or add devices not incHuded in the initiaH
settings, seHect Edit to dispHay the Edit NetCommand
menu.
DeJete Device Screen
Figure 26
SeHecflng DeHetefrom the Setup menu displays the Delete
screen. You can choose to delete a single device by
selecting the device you would like to delete, or you can
delete the entire NetCommand configuration. After you
have chosen the device, or the entire configuration, you
will be prompted to confirm your choice to delete. If you
select the Entire Configuration, the Initial button becomes
available on the Edit NetCommand screen. If you delete a
device that you learned the remote control signals for the
learned signals are erased_
Figure 26. Delete screen
Figure 2Z Finish screen
IMPORTANT
NetOommand does not allow you to delete
a device or change the connections for a
device (like a VCR or a DVD player} if the
device (input} is currently being displayed by
the TV.
Switch the TV to a different device from the
or deleting° To change
the A/V receiver, you need to be listening to
_eakers.
52 Chapter 3. NetCemmand Setup and Editing