Computer With An Hdmi Monitor Output; Computer With A Dvi Monitor Output - Mitsubishi Electric WD-73727 Owner's Manual

Connecting a Computer with an HDIVll or DVl Monitor Output
Computer with an HDMI Monitor
Figure 13
An HDMI-to-HDM/ cable is required. This is not included with
the TV. It may be available at your local electronics retailer
Connect an HDMI cable from HDMI 2 on the TV
back panel to the PC's HDMI outpuL HDMI devices
provide video and audio through this cable, so no other
connection is required.
TV Back Panel
PC with HDMI Output
Computer with a DVl Monitor Output
Figure 14
A DVl-to-HDMI cable or DVI/HDMI adaptor and HDMI cable and
audio cables are required. These are not included with the TV.
They may be available at your local electronics retailer.
2_
Connect the DVI-to-HDMI cable (recommended) (or
DVl/HDMI adaptor with an HDMI cable) from the PC
DVI output to HDMI 2 on the TV back panel.
NOTE: If you are using a DVI/HDMI adaptor, it is
important to connect the adaptor to the DVI device
for best performance.
Connect a set of audio cables from AUDIO OUT on
the PC back panel to INPUTiDVl Analog Audio 2 on
the TV back panel. The red cable connects to the R
(right) channel, and the white cable connects to the L
(left) channel.
NOTE: The HDMI connection supports copy
protection (HDCP). Some devices require connecting
to an analog input first, in order to view on-screen
menus and select DVl as the ouput. Please review
your equipment instructions for DVl connectivity and
compatibility.
Figure 13. Connecting a Computer with an HDM/ Monitor
Output
IMPORTANT
To view PC video on the TV:
Activate the PC option in NetCommand. You
can do this during initial NetCommand setup
(in the Device Setup screen), or at any time
afterwards by using the NetCommand Add
function.
See Appendix A for signal compatibility.
TV Back Panel
DVl-to=HDMI Cable
PC with DW Output
Figure 14. Connecting a Computer with DW Monitor
Output
Chapter 2. Connecting 31