Mitsubishi Electric WD-73727 Owner's Manual page 100

Hide thumbs Also See for WD-73727:
Table of Contents

Advertisement

Appendix
A: Specifications
From time to time, Mitsubishi may offer software updates to expand the features or operation of this TV. When these
updates are available they will be announced
on our web site, Mitsubishi-tv.com.
If you return your owner's registration
card, with your model and serial number, you may receive written notification of available software updates.
TV Specifications
DLP, 0.843" chip, 1920 x 1080 pixels with Smooth Picture
TM
WD-52628, WD-62628:
120-watt VlP type
WD-73727: 150-watt VIP type
Over-the-Air:
VHF 2-13, UHF 14-69
Analog Cable: 1-125
Digital Cable: 1-135
Over the Air:
Analog NTSC, Digital ATSC with sub-channels (all 18 v_deo
formats)
Cable:
Analog NTSC (non-scrambled)
Digital QAM 64 and 256 with sub-channels
(non-
scrambled)
CableCARDTM:Authorized scrambled and non-scrambled
digital
channels
Note for Digital Channels: The channel numbers displayed on screen are determined by the broadcaster
or cable
company and can vary from the standard frequency number.
If there is no channel number information
included from
the broadcaster
or cable company, then the TV will create a channel number based on the frequency
number as the
main channel number and the program number as the sub-channel
number. When using an authorized CableCARD,
the channel numbers are determined
by the cable company.
F connector, 75-ohm
Inputs
Antenna/Cable
input Qty. 2
HDIVII (digital video/audio),
Qty. 2
Signal Type
Video/S-Video,
Qty, 3 each
(1 front, 2 rear)
Signal Type
Component
Video (Y/Pr/Pb},
Qty. 3 sets
Signal
Type
HDMI standard connector
HDMI EIA-861B standard for digital audio and video.
Video: 480i, 480p, 720p, 1080i
Audio:
PCM stereo
HDMI 1: Not intended for use with personal computers.
HDMI 2: Accepts PC input.
VGA (640 x 480), 60Hz
W-VGA (848 x 480), 60 Hz
SVGA (800 x 600), 60Hz
W-SVGA (1064 x 600), 60Hz
XGA (1024 x 768), 60 Hz
1280 x 720, 60 Hz (EIA standards)
Video:
RCA Pin Hug, 1.0 V p-p, 75 ohm
S-Video:
Four-Pin DIN Plug
Y: 1.0 Vp-p 75-ohm
C: 0.286 Vp-p (burst signal), 75-ohm
NTSC 480i only
RCA Pin Hug (EIA-770.3 Standard Levels and Timing)
Y:
1.0 Vp-p (includes sync), 75-ohm
Pr:
700 mV p-p, 75-ohm
Pb:
700 mV p-p, 75-ohm
EIA-770.1 & EIA 770.2 480i, 480p, EIA 770.3 720p and 1080i
(video standards)
100
Appendices

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-52628Wd-62628Wd-52628Wd-62628

Table of Contents