Operation Of Pip And Pop - Mitsubishi Electric WD-73727 Owner's Manual

Operation of PIP and POP
You can display programs from analog channeb, analog inputs, or analog devices as pbtureqn-picture (PIP) and
pbture-outside-pbture (POP)+ The TV has a second analog tuner for non-scrambbd analog channels received on
ANT-1 and displays them as the PIP/POP sub-pictures. Digital channeb and devices can be shown as the main picture
but cannot be the sub-pbture. PC screens can be viewed as the main picture with PIR
Press PIP/POP to activate the PIP/POP option. With
each press of the PIP/POP button on the TV remote
control, (within seconds of each press), the PIP/POP
cycbs through the following display options:
MA_N
PICTURE Side-by-Side
Side-by-side
pictures
(Not available
when PC is
source)
MA_N
PICTURE
POP 1
POP 2
POP 3
3 POP
(Not available
when PC is
source)
Ant-I 2 X)OLX
Standard
Stereo SAP
rV-PG DLSV
SQV1
PIP/_qt-l 17
PIP
(PC as main
picture only)
Ant-12 XXXX
Stand_d
Stereo SAP
TV+PG DLSV
SQVl
PIP off
Exchanging Program Images
Press EXCH to exchange the main picture and the PIP/"
POP picture. Pictures from digital channels can only be
shown as the main picture. PC images can only be the
main picture. If you press EXCH while viewing images
from a PC, the TV exchanges audio with the PIP but
leaves the main image in place.
Moving a PIP image
If no menus are on screen, press ADJUST _,, _F, 4, or
to move the PIP display anywhere on the main screen.
When the main picture is from a PC, the PIP can be
moved through four designated positions.
Automatic POP Switching
When automatic POP switching is active, the TV cycles
through memorized analog channeb on Ant-1 or Ant-2 or
strobe pictures from other A/V components in the POP
display. Press PAUSE to pause or restart automatic POP
switching.
SeJecting POP "Live" image
Press ADJUST A T 4 _ to select a different POP "live"
image (automatic POP switching must be paused.)
Freezing the PIP and Side-by-Side
Press PAUSE to freeze the PIP and side-by-side images.
Press PAUSE again to return to a "live" image.
To turn PIP/POP off, wait at bast 10 seconds and then
press PIP/POP. The next time you activate PIP/POP, the
last-used PIP/POP option wiii be displayed.
Changing PIP/POP Device
When PIP is displayed, press PIP DEVICE to change the
PIP picture source device. A menu similar to the Device
Selection menu will be displayed.
Changing PIP/Side-by-Side CharmeJs
Press PIP CH to scroll up and down through memorized
channels on ANT-1 and ANT-2.
iMPORTANT
The side=by=side option cannot show the
same channel or device on both sides,
Jf ANT-1 or ANT-2 is the main picture,
ANT-2 is not available as a PiP, POP, or
side=by=side image.
PiP/POP is not compatible with signals
from memory cards.
You can view only one HDIVil input at a
time with the PIP/POP or side=by=side
feature.
86 Chapter 6. Add#iona/ Features