Audio Settings - Mitsubishi Electric WD-73727 Owner's Manual

Audio Settings
q
NOTE: The effects of the audio settings of Bass, Trebb, Baiance and Surround affect the sound heard through the /
TV speakers oniy.
/
AnaJog and DigitaJ Audio Settings
A siider dispiays on screen for most settings. When the
siider is dispiayed, it has a numeric vaiue, so that 63 is
the maximum, 31 is the mid-point, and 0 is the minimum.
0
Bass
Enhances or reduces How-pitched sound.
0 Treble
Enhances or reduces high-pitched sound.
0
Balance
Adjusts the ievei of sound between the Heftand right
speakers.
0 Surround
Creates simuiated stereo and surround effects
through the TV speakers. Your choices are:
Off: No surround effects.
Simubted Stereo: Your TV will create a simuiated
stereo effect when watching a non-stereo
program.
Surround Sound: Your TV will create a simubted
surround effect when watching a stereo program.
0 Level Sound
Turn On or Off to automatically equalize the
volume level when there are significant soundqevel
differences between program segments, e.g.,
between regular programming and commercials. To
receive the best fidelity with music programs, turn
this setting to Off. When connecting to an AiV
receiver, set level sound to OFF and turn the TV
speakers off to send full dynamics to the AiV receiver.
AnaJog-OnJy Audio Settings
You can set analog-only audio settings while viewing
either analog or digital sources, but the settings affect
broadcast or recorded analog content.
0 Listen to
Determines how your TV receives a broadcast audio
signal and plays the sound you hear.
Your choices are:
Stereo: Default setting. The TV plays stereo
broadcasts in stereo and mono broadcasts in
mono. The word "Stereo" is displayed when you
tune to a channel broadcasting in stereo.
SAP (Second Audio Program): Additional
monaural sound track that you cannot hear
during normal TV viewing. The SAP signal might
be related to the program you are watching,
(such as a sound track in a foreign language), or
it might be unrelated (such as a weather report).
If an SAP signal is broadcast, the letters "SAP"
are displayed when you tune to the channel.
Mono: Reduces background noise. Use when
receiving a weak stereo audio signal. All audio is
played mono with this setting.
Listen to is not available for devices connected to the TV
Inputs, component inputs, or 1394 devices.
DigitaJ-Orfly Audio Settings
You can set digitaPonly audio settings while viewing
either analog or digital sources, but the settings affect
only broadcast or recorded digital content.
0
Language
Determines what possible language you can hear.
Your choices are:
French
German
Italian
Portuguese
Spanish
Other
IEEE 1394 AmpJifier Settings
0
Balance
Adjusts the level of sound between the left and right
speakers. The slider range is 0-254, with 127 at the
center.
0 Loudness
Set to On to make the audio level more uniform.
0 Preset
Select the mode that matches the audio source.
Your choices are:
Off _ Classical Music
Jazz _ Movie
Rock _ Speech
Equalize the sound.
80 Chapter 5. TV Menu Operations