Mitsubishi Electric WD-73727 Owner's Manual page 34

Connecting Compatible IEEE 1394 Devices, continued
Connection StyJes
There are two different connection sues that can be
used when connecting IEEE 1394 devices. Use the sue
that fits your network of audio/video products.
Direct DeviceoTooDevice StyJe
The BEEE1394 offers you the capabiiity to chain devices,
uniike previous audio and video connections where you
had to individuaUy connect each device directly to the
TV. For exampb, you can connect your D-VHS to your
1394 DVD Hayer and then connect the 1394 DVD Piayer
to the TM The resuiflng IEEE 1394 chain wiU allow you
to add more devices to the chain. You will be able to
see each video device on the TV's Device Selection
Menu and send information from any IEEE 1394 device
to other compatible devices.
TV
Digital
Digital VCR
DVD
Hub Connection StyJe
The EEE 1394 also offers you the capability to connect
your devices using the TV as a hub within the audio/
video network. Each device can send information,
which may include audio and video, to any other device
in the network.
DVD #1
Digital TV
1394 VCR #3
Monitor
) Digital DVD #2
Other
1394 Deqce #1
Digital VCR #2
Digital
VCR #1
4-PinoStyme vs. 6oPin-Styme Connectors
There are two different types of connectors used for IEEE
1394 terminals and cables: a 4-pin and a 6-pin style.
4 pin connector
6 pin connector
The 4-pin connector sends digital
audio signals, digital video signals,
and digital control signals back and
forth between devices. Your TV
has three 4-pin-type connection
jacks available. One is on the front
panel and two are on the back.
The 6-pin connector can send
the same digital audio, video,
and control signals as the 4-pin
connector, but the 6-pin connector
can also send low-voltage electrical
power. This TV does not have 6-pin
connectors.
The purpose of this low-voltage electrical power is to
provide the needed operating power to a device that is
not connected directly to the household AC power, such
as a camcorder. A device with a 6-pin connector can
send this electrical power to another device, or receive
electrical power from another device, or simply use a 6-
pin connector without using the two additional pins.
6 pin to 4 pin adaptor
A 6-pin connector cannot be
connected directly to a 4-pin jack,
and vice versa. To connect a 6-pin
device to a 4-pin device, you need
to obtain a 6-pin-to-4-pin adaptor
or adaptor cable. These cables
are available from electronic and
computer stores.
When connecting a 6-pin device (such as a camcorder)
to the TV, (if it is designed to receive electrical power
from another 6-pin device) you wiii need to connect
the camcorder directly to the household AC, or use the
camcordeFs battery for power. If this is not possible,
then the camcorder will need to be connected directly to
another 6-pin device in the network that can provide the
electrical power.
Other 1394 Device #2
34 Chapter 2. Connecting