Mitsubishi Electric WD-73727 Owner's Manual page 13

Front Control Panel, continued
None (indicator off) Normal TV on or standby condition.
"follow, stoady Room tomporaturo is too high.
TV may require service. Red, either stoady or
blinking
Normal operation.
TV will not operate when the ambient room
temperature is too high. Turn off the TV and wait
until the room temperature drops.
Turn off the TV and unplug the set from the AC power
source. Wait one minute and then plug the set back
in.
If the LED is still on, contact your dealer or a
Mitsubishi Authorized Service Center. See
www.mitsubishi-tv.com or call 1-800-332-2119 to
receive Authorized Service Center information.
None (indicator off) TV is powered OFF. Normal operation.
Green, steady TV is powered ON. Normal operation.
Green, rapid blinking 1. TV just plugged into AC outlet. Wait until blinking stops before turning on
(approximately 1 minute). Normal operation.
E
2. AC just restored after power Wait until blinking stops before turning on
failure. (approximately 1 minute). Normal operation.
3. TV Rebooting after System Reset Wait until blinking stops before turning on
used. (approximately 1-2 minutes). Normal operation.
4. TV Rebooting after power Wait until blinking stops before turning on
fluctuation or receiving abnormal (approximately 1 minute). Normal operation.
digital signals from digital channel,
CableCARD
TM,
or digital device.
5. You have begun the procedure For detailed information, see the instructions
to update software from an that accompany the authorized software update.
authorized flash memory device. Important: Do not use non-authorized software at
any time.
Green, slow blinking TV powered off and automatic-on Normal operation. TV can be turned on at any time.
timer is set.
A/V Reset
There may be times when you wish to reset the AiV (Audio and Video) settings back to the factory defaults. To return
all the settings at once, press GUIDE and FORMAT on the front panel at the same time. To reset the ddaults for
individual devices, use the AiV Memory Reset selection on the Audio/Video menu.
Chapter 1. Television Overview 13