Enabling Hdmi Control Of Cec Devices - Mitsubishi Electric 3D DLP 742 series Owner's Manual

3d dlp home-cinema television
Hide thumbs Also See for 3D DLP 742 series:
Table of Contents

Advertisement

38
Co trol of(3
Devices
Many newer HDMI devices have a feature called
Consumer Electronics Control (CEC) or HDMI Control.
HDMI Control allows one device, such as the TV, to
control other devices, such as an A/V receiver or disc
player. Use of CEC is optional.
Each manufacturer chooses which CEC functions to
support so it is difficult to predict which devices and
features are compatible with Mitsubishi's HDMI Control.
You may find that CEC functions for a specific device are
limited.
4,
if prompted for a name, high-
light a name for the device
and press ENTER to add a
check. The device itself may
later override the name you
assign.
Highlight On and press ENTER
to add a check.
6.
Press EXIT to close the New Device Found screen.
Note:
At any time after completing Auto input Sens-
ing, you can set the TV's HDMI control on or off
in the Inputs > HDMI Control menu.
Enabling HDM! Control
of CEC Devices
To ensure proper detection
Power on HDMI devices before connecting
them to the TV.
Connect and set up HDMI devices one at a
time.
1,
Power on the device and allow it to complete the
power-on sequence (boot up). Stop any playback.
Connect the device to one of the TV's HDMI inputs.
3,
When the TV detects the connection, the New
Device Found screen will appear.
Note:
See "if the New Device Found Screen Has No
HDMI Control Option" on this page if an HDMI
Control option is not offered.
New Device Found screen with HDMI Control option.
This screen displays only if the device's HDMI Control is
enabled.
For assistance
call 1(800} 332-2119

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents