Using The Tv With A Personal Computer - Mitsubishi Electric 3D DLP 742 series Owner's Manual

1. Additional TV Features 11
Using the TV with a Persona/Computer
Connecting a Computer to the TV
Use one of the connection methods Bisted below based
on your com
Digitam DVm
HDMm
)uter's output.
DVFto=HDMR cabBe or
an HDMR cabBe with a
DVFto=HDMR adapter
HDMFto=HDMR cabBe
Audio cabBe with
mini=pBugs
No additional
audio connection
is required.
HDM_ Connection
Mitsubishi recommends using high-speed HDMI cables
to connect newer devices incorporating HDMI technol-
ogy.
TV jack panem
Connect the computer's digital video output to
one of the TV's HDMI jacks. See the connection
diagrams on this page for the method suited to your
equipment.
Connect the computer's audio output using one of
these options:
* For digital DVl video signals, connect the
analog audio output to the TV's DVmiPCAUDmO
mNPUT jack.
For HDMI signals, no additional audio connec=
tion is required.
Note:
mfyou are unabme to hear audio from the
computer, there may be an incompatibility in
the computer's hardware, software, or internal
settings. Consult a trained computer technician
for advice.
Power on the TV and computer. The TV will detect
the connection and display the New Device Found
screen.
4, In the New Device Found screen, press A T to
highlight PC in the list of device types. It is impor-
tant to use the name PC so that the TV processes
the PC signal correctly.
5, Highlight EXIT and press ENTER to close the New
Device Found screen.
An HDMI-to-HDMI connection carries all video and
audio on a single cable.
DVl Video Connection
TV jack panel
Analog audio cabme
with mini-plugs
Computer with DVmand
anamog audio outputs
A DW connection from a personal computer requires a
separate audio connection.
For assistance car 1{800) 332-2119