Using The Tv With A Personah Computer - Mitsubishi Electric 3D DLP 642 series Owner's Manual

8 1. Additional TV Features
Using the TV with a Personal Computer
Connecting a Computer to the TV
Use one of the connection methods Uisted beUow based
on your computer's output.
Digitam DVm
NDMm
DVR-to-HDMRcame or
an HDMR cabUe with a
DVR-to-HDMRadapter
HDMR-to-HDMR cabUe
Audio came with
mini-pUugs
No additionaU
audio connection
is required.
2_
Connect the computer's digitaU video output to
one of the TV's HDMR jacks. See the connection
diagrams on this page for the method suited to your
equipment.
Connect the computer's audio output using one of
these options:
o For digitaU DVRvideo signaUs, connect the
anaUog audio output to the TV's DVl/PC AUDIO
INPUT jack.
For HDMR signals, no additional audio connec-
tion is required.
Note:
3_
4_
mf y ou are unabme to hear audio from the
computer, there may be an incompatibility in
the computer's hardware, software, or internal
settings. Consult a trained computer technician
for advice.
Power on the TV and computer. The TV will detect
the connection and display the New Device Found
sc teen.
In the New Device Found screen, press A Y to
highlight PC in the list of device types. It is impor-
tant to use the name PC so that the TV processes
the PC signal correctly.
Highlight EXmTand press ENTER to close the New
Device Found screen.
H[:)MU Connection
Mitsubishi recommends using high-speed HDMI cables
to connect newer devices incorporating HDMI technol-
ogy.
Computer with HDMI output
An HDM/-to-HDM/ connection carries all video and
audio on a single cable.
DW Video Connection
Computer with DVmand
analog audio outputs
A DVI connection from a personal computer requires a
separate audio connection.
For assistance can 1(800) 332=2119