General Specifications - Yamaha MGP32X Owner's Manual

Appendix
General Specifications
Input Channel HPF
Input Channel EQ
Input Channel Compressor
Digital Signal Processing
STEREO IMAGE MGP32X CHs 29/30, 31/32
USB Audio
USB device recorder
Signal Indicator
LED Level Meter
Phantom Voltage
Lamp
Power Supply
Power Consumption MGP32X: 86 W (max), MGP24X: 76 W (max)
Dimensions (W x H x D)
Weight
* The device may not function depending on your iPod/iOS software version.
For updated information, check the Yamaha Pro Audio web site (http://www.yamahaproaudio.com/).
* Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corporation reserves the
right to modify products or specifications at any time without prior notice. Since specifications, equipment, and options may not
be the same in every locale, please check with your Yamaha dealer.
50
MGP32X/MGP24X Owner's Manual
100 Hz, 12 dB/oct
HIGH 8 kHz, shelving
MID MGP32X: CHs 1–24, 29–32: 250 Hz to 5 kHz, peaking CHs 25–28: 2.5 kHz, peaking
MGP24X: CHs 1–16, 21–24: 250 Hz to 5 kHz, peaking CHs 17–20: 2.5 kHz, peaking
LOW 125 Hz, shelving
Parameters (ratio, threshold, output gain) are controlled by one knob.
DUCKER MGP32X CHs 29/30, 31/32 (DUCKER SOURCE: CH24 or GROUP1)
MGP24X CHs 21/22, 23/24 (DUCKER SOURCE: CH16 or GROUP1)
LEVELER MGP32X CHs 29/30, 31/32
MGP24X CHs 21/22, 23/24
MGP24X CHs 21/22, 23/24
FX1: Rev-X 8 Programs
FX2: SPX 16 Programs
GEQ STEREO OUT L/R
COMP STEREO OUT L/R
Device
(USB to device)
File System
Audio File format (Playback)
MPEG Audio 1, 2, 2.5
MPEG4 AAC-LC
WAV File
Audio File format (Record)
MP3 (MPEG1 Layer3)
WAV
Connector Specification
for iPod/iPhone Supported Devices*
(USB for iPod)
Format
Connector Specification
CH Input PEAK indicator (red): PEAK lights if the signal comes within 3 dB of the clipping level.
SIG indicator (green)
4 ×12 segments LED meter: (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB)
Metering point: post stereo master fader or pre monitor level
+48V
XLR-4-31 type,The Lamp voltage is 12V DC between 3 and 4 pins of XLR-4-31 connector.
Lamp can use 5W max.
Requirements 100–240 V 50/60 Hz
MGP32X: 1,027 mm x 169 mm x 565 mm (40.4" x 6.7" x 22.2")
MGP24X: 819 mm x 169 mm x 565 mm (32.2" x 6.7" x 22.2")
MGP32X: 19 kg (41.9 lb.), MGP24X: 15.5 kg (34.2 lb.)
01: HALL 02: WARM HALL
04: PLATE 1 05: PLATE 2
07: WARM ROOM 08: SLAP ROOM
01: HALL 02: ROOM
04: LARGE PLATE 05: SMALL STAGE
07: KARAOKE ECHO 08: DELAY
10: EARLY REF. 11: CHORUS
13: FLANGER 14: SYMPHONIC
16: RADIO VOICE
TYPE : 14BandGEQ, Flex9GEQ
8 User Programs
TYPE : Comp, MultiBand
3 Preset Programs, 5 User Programs
USB mass storage class
FAT32
Sample rate: 8 k - 48 kHz
Bit rate: 8 k - 320 kbps, VBR
Sample rate: 8 k - 48 kHz
Bit rate : 8 k - 320 kbps, VBR
Sample rate: 8 k - 48 kHz
16bit PCM
Sample Rate: 44.1 kHz
Bit rate: 128 k, 192 k, 256 k, 320 kbps
Sample Rate: 44.1 kHz
16bit PCM
USB A Type
iPhone, iPhone 3G, iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5,
iPod touch (1st through 5th generation), iPod classic, iPod nano
(2nd through 7th generation)
iPod, iPhone exclusive
USB A Type
03: BRIGHT HALL
06: ROOM
03: PLATE
06: VOCAL ECHO
09: SINGLE DELAY
12: PHASER
15: DOUBLER